Equipment & Trucks For Sale in gore

3700 hours Engine Deutz TCD 3.6L, four-cylinder, Tier 4i, common rail diesel Max rated power 118hp/83kW at 2200rpm Transmission 60F/60R five speeds/ four ranges, three-speed powershift (40kph); Stop & Go function Cab suspension Mechanical (spring and dampener) Max lift on linkage 6600kg Hydraulic remotes Rear: Four remote valves, double acting with float, standard Hydraulic capacity 60L/min plus separate 40L/ min power steering pump PTO Four-speed, 540/540E/1000/1000rpm Dimensions 4270mm (L), 2288mm (W) Wheelbase 2440mm Weight 4970kg Max loaded weight 8500kg (40kph) Fuel tank 165L Oil change interval 500hr or annually

Used 2014 CASE 2050M 23.0t Bulldozer. A low hour Bulldozer in great condition. This tractor is well specified with a 3.4m Semi-U Blade, Rear Rippers, Sweeps and Track Guards. Track Chains and Sprockets on this machine was replaced less than 100 hours ago. This unit runs the FPT 6.7L 232Hp engine and Hydrostatic Transmission. This model has industry-leading draw bar pull and great visibility. Hour Meter: 3,730 Hours (Machine still in work, so hours are subject to change)

Kverneland RO-M 3PL Spreader Very tidy machine

Field Master GMT 300 Rotary Pasture Topperr3mrGear Driver3 RotorrBrand NewrWas $14,500...

Deutz-Fahr Agrotron TTV 630 Low hours and very tidy Engine: EngineDeutz TCD 2012 L6 4V turbocharged inter-cooled diesel 6-cylinder liquid-cooled 369.6 ci [6.1 L] Rated Power (ECE R24):203 hp [151.4 kW] Maximum Power (ECE R24):222 hp [165.5 kW] Rated RPM:2100 Oil change:500 h Standard tires (ag):Front: 480/70R30. Rear: 580/70R42 Optional tires (ag):Front: 600/70R30. Rear: 710/70R38 Front: 600/70R30. Rear: 620/70R42 Front: 540/65R34. Rear: 650/65R42 Front: 600/70R30. Rear: 650/65R42 Deutz-Fahr Agrotron TTV 630 Dimensions Weight:15930 lbs [7225 kg] Wheelbase:110.9 inches [281 cm] Length:189.3 inches [480 cm] Width:107.1 inches [272 cm] Height (cab):124.3 inches [315 cm] Deutz-Fahr Agrotron TTV 630 Power Engine (net):203 hp [151.4 kW] Deutz-Fahr Agrotron TTV 630 Mechanical Chassis:44 MFWD 4WD Differential lock:automatic front and rear differential locks Steering:power Brakes:wet disc Cab:Cab standard with air-conditioning. Mechanical or semi-active pneumatic suspension is optional. Deutz-Fahr Agrotron TTV 630 Hydraulics Type:load sensing Valves:4 to 7 Pump flow:29.1 gpm [110.1 lpm] 42.3 GPM [160.1 lpm] * Steering flow:11.6 GPM [43.9 lpm] Deutz-Fahr Agrotron TTV 630 PTO Rear PTO:independent Clutch:electro-hydraulic wet disc Rear RPM:540/540E/1000/1000E* Front RPM:1000* Engine RPM:1000@1960 1000E@1600 Deutz-Fahr Agrotron TTV 630 3 Point Hitch Rear Type:III/II Control:position and draft control Rear lift:22046 lbs [10000 kg]

Used 2014 CASE 885B 20.0t Grader. A very tidy machine with low hours. This unit is well set up with: 14ft Moldboard Rear Rippers with Scarifiers Michelin 17.5-R25 Tyres Front Blade also available (not installed) A full Leica 3D System was installed on this machine in 2022 at a cost of $80,000.00+GST. This is available for an extra $55,000.00+GST over and above the asking price, or can be removed if not required. Located Gore

Used 2022 XCMG XE27U 2.7 ton Excavator done only 114 hours from new! This machine runs a Kubota D1105 20.9 Hp Engine and XCMG Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: Canopy Rubber Tracks Blade Dual Auxiliary Piping Hydraulic Hitch 1,200mm Wide Bucket Dig Bucket Anti-Drop Valves E-Stops Located Auckland

Used 2022 XCMG XE55U 5.5t Excavator A tidy, low-hour machine. This Short Radius unit is set up with the below options: A/Cond Cab, Rubber Tracks, Power Angle Blade, Dual Aux. Circuits, Hydraulic Hitch, Attach2 Twin-Ram Tilt Bucket, Dig Bucket, Trench Bucket. Located Christchurch

2022 XCMG XE17U 1.7 ton Excavator done only 28 hours from new! This machine runs a Kubota D902 15.8 Hp Engine and XCMG Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: Canopy Rubber Tracks Blade Hydraulic Expanding Undercarriage 990mm/1,240mm Manual Quick-Hitch 900mm Wide Bucket 450mm Dig Bucket 300mm Trench Bucket Attach2 Mini-Tilt Hitch available for an extra $3,200.00+GST incl. installation. Located Auckland

Used 2018 CASE CX17C 1.7t Compact Excavator. A tidy machine that has been well maintained from new. This machine is set up with Canopy, Hydraulic Expanding Tracks, Draw-Pin Hitch, Tilt Bucket, Dig Bucket and Trench Bucket. New Rubber Tracks just installed. Hour Meter: 1,660 Hours (Hours may change as machine still in work) We also have a 2018 Brian James 2,500Kg Plant Trailer available for an extra $5,000.00+GST. Located Gore