Equipment & Trucks For Sale from $10,000 to $50,000 in gore

Used 2022 XCMG XE35U 4.0 ton Excavator. This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 108 Hours (Machine still in use, so hours may change) Located Gore This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 200.4 Hours (Machine still in use, so hours may change) Located Gore

Used 2018 CASE CX17C 1.7t Compact Excavator. A tidy machine that has been well maintained from new. This machine is set up with Canopy, Hydraulic Expanding Tracks, Draw-Pin Hitch, Tilt Bucket, Dig Bucket and Trench Bucket. New Rubber Tracks just installed. Hour Meter: 1,660 Hours (Hours may change as machine still in work) We also have a 2018 Brian James 2,500Kg Plant Trailer available for an extra $5,000.00+GST. Located Gore

Used but very minimal work PIONEER 140 The Celli fixed-width spike rotor harrow has solid boron spikes at an angle that penetrates ground using minimal power. Because it was first designed for stony ground, the machine can take rough conditions. The tailgate traps soil, so its released as a fine tilth. A suitable seedbed is often created in one pass. Features: Drive units designed and produced entirely by Celli enabling complete quality control over all componentry and workmanship Multi flange waterproof sealing system exclusively by Celli to give rotor bearings full protection from water, dirt, wire and other foreign material Steel face to face rotor seals for longer lasting rotor bearings Robust headstock for a stronger, longer lasting rotary hoe Box section body for rigidity and long life Oil filled rotor bearings for low maintenance and guaranteed lubrication Four speed gearbox rated up to 140 hp Swinging lower links Gear side drive 250mm working depth Side skids Two piece adjustable, spring loaded frangor tailgates Slip clutch

Used 2022 XCMG XE27U 2.7 ton Excavator done only 114 hours from new! This machine runs a Kubota D1105 20.9 Hp Engine and XCMG Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: Canopy Rubber Tracks Blade Dual Auxiliary Piping Hydraulic Hitch 1,200mm Wide Bucket Dig Bucket Anti-Drop Valves E-Stops Located Auckland

Amazone ZA-M Profis Has extra extensions of 1000L and 500L Taking to total of 3000 L

Used 2006 Takeuchi TB1140 14.0t Digger. A tidy, low hour machine. This unit is set up with a Blade, Hyd. Hitch and Dig Bucket. A very good price for the hours. Located Christchurch

2009 Kverneland 7650 Trailed Bale Wrapper, 5000 bales, 3D Wrapping. C/W End Tipper, Great Wrapper with low bale count. Price Excludes GST WAS $24990.00 + GST NOW $21990.00 + GST...

Field Master GMT 300 Rotary Pasture Topperr3mrGear Driver3 RotorrBrand NewrWas $14,500...

Used 2014 TEREX PT50-T Compact Track Loader A tidy machine with good hours. Tracks are in great condition with approximately 80% life remaining. This unit is set up with an Open Cab, Joystick Controls and NORM 4in1 Bucket. Machine Specifications: Engine: Perkins 404D-22T 60Hp Turbo Operating Weight: 2,812 Kg Machine Width: 1,524mm (Bucket 1,600mm) Lift Capacity: 862Kg (50% of Tipping Load) Located Gore

Kverneland RO-M 3PL Spreader Very tidy machine