Used Equipment & Trucks For Sale in gore

DEUTZ-FAHR 5115.4G Complete with loader Low hours, tidy example Engine: FARMotion Tier 4i engines Cylinder: 4 Displacement: 3849 cc Maximum power (ECE R 120) @ 2,000 rpm: 109 hp Power at rated speed (ECE R 120) @2,200 rpm: 103 hp Max. torque @ 1,600 rpm: 408 Nm Fuel tank capacity: 152 Ltr Rear lift capacity (STANDARD version): 3600 kg Wheelbase (4WD/2WD): 2400 / 2360 mm Weight with cab: 4200 kg Maximum load capacity: 7000 kg

Kuhn 4 furrow reversible plough

2017 Lemken Juwel 7M Rev Plough 4+1 Skimmers with Coulters on the rear. Vari width Hydro Reset Butterfly Wheel

Used 2022 XCMG XE35U 4.0 ton Excavator. This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 108 Hours (Machine still in use, so hours may change) Located Gore This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 200.4 Hours (Machine still in use, so hours may change) Located Gore

Used Komatsu D65P-11 19.0t Bulldozer. A straight and tidy machine. This unit is set up with a Straight Blade, Drawbar and Cabin. Sound Track Gear with approx. 40% life remaining. Ready to go to work. Located Auckland

Used but very minimal work PIONEER 140 The Celli fixed-width spike rotor harrow has solid boron spikes at an angle that penetrates ground using minimal power. Because it was first designed for stony ground, the machine can take rough conditions. The tailgate traps soil, so its released as a fine tilth. A suitable seedbed is often created in one pass. Features: Drive units designed and produced entirely by Celli enabling complete quality control over all componentry and workmanship Multi flange waterproof sealing system exclusively by Celli to give rotor bearings full protection from water, dirt, wire and other foreign material Steel face to face rotor seals for longer lasting rotor bearings Robust headstock for a stronger, longer lasting rotary hoe Box section body for rigidity and long life Oil filled rotor bearings for low maintenance and guaranteed lubrication Four speed gearbox rated up to 140 hp Swinging lower links Gear side drive 250mm working depth Side skids Two piece adjustable, spring loaded frangor tailgates Slip clutch

Feraboli 265 HTC Extreme in a Goweil Frame About 35k Bales and same on Wrapper Good solid Machine do your own

Deutz 6135G Summit 140Hp Trima FEL 6 Speed power Shift 50km Front suspension Trailer Brakes etc Selling OBO Current model Current Shape Suit new buyer

Used 2022 XCMG XE55U 5.5t Excavator A tidy, low-hour machine. This Short Radius unit is set up with the below options: A/Cond Cab, Rubber Tracks, Power Angle Blade, Dual Aux. Circuits, Hydraulic Hitch, Attach2 Twin-Ram Tilt Bucket, Dig Bucket, Trench Bucket. Located Christchurch

Used 2013 Kobelco SK75SR-3 7.5t Excavator. A tidy, late model, one owner machine. This Short Radius unit is set up with a Standard Mono Boom, Blade, Steel Tracks with 450mm Grousers, Front Screen Guard, Hyd. Hitch and Dig Bucket. Located Christchurch