Trucks & Construction Machinery for Sale

A very tidy water tanker thats done low Kms and well set up. Around a 4,000 litre tank with rear spray bars. Just been serviced, checked and has current COF, REG and RUC. It has tidy interior, has it's own Honda GX120 pump and motor, has a handy 5,430kg payload and starts, runs and drives very nicely. Ideal for keeping those dusty summer roads under control. All ready to roll jump in and go to work.. Done low kms these may vary as this truck is part of the hire fleet Finance available from $1114/Month === Buy any Truck or Excavator off us this month and go into the draw to WIN a trip for 2 to Rarotonga!!!! (flights and accommodation included) Terms and conditions apply.. *** Our Trucks all have *** * 3 months registration * Current COF, RUC & REGO * Vehicles are all sold groomed DELIVERY NZ WIDE FOR $900 + gst Ts & Cs apply. . =====

2.2 metre pick up and rotor knife protection system, great trailed pick pup system, Self loading capacity 48m3 or 30m3 for Silage bin, Great as loader wagon and Silage Trailer Combo. Low centre of gravity great for undulating ground. Small HP required to run. 4 Wheel Braking

The ultimate Roller Drill 21" ondule ring with breaker ring on 70mm axle Farmer-owned machine Very good condition Farmchief Swiss Airseeder with hydraulic fan GPS electronic control Front levelling paddles Centre pivoting wings Rear platform Because of our central location, we specialise in freighting machinery NZ wide - especially North Island - enquire now! For more quality used machinery, check out www.mechs.co.nz

Slurry Tanker with 8" auto filler. Purchased new in 2011

The European built Hektor 300 subsoiler is a seriously well-built piece of kit suited up to 280Hp tractors. The action of the cranked leg and wide flat-lift shares under the ground, has a serious lifting effect, and shatters across full working width. You can see the huge wave in the surface profile as the machine goes past. The ground is not disturbed on the surface due to the way the legs slice through surface, and the large diameter heavy cage roller really pushes the dirt/turf back down. In pasture you can hardly see the cut from each leg, even without coulters. All of the legs are protected by hydraulic trip protection (independent accumulator for each leg). Depth control is on large hydraulic cylinders connected to the rear roller, this has a very simple spacer system to allow you to quickly set the working depth. 4 legs over 3.0mtrs makes for easy pulling (min 150Hp). Breathe life into damaged crop and pasture ground with this machine!

The Bednar Terraland TN 3000 HD7R HD chisel plough with hydraulic breakaway protection, has proven itself in some of this countrys harshest conditions. The HD7R is the highest spec, top of the range model from Bednar, and we have sold this into some of the toughest conditions we have experienced with deep rippers in NZ, and this machine has blown away every operator who purchased one. From the quality of the paint finish, to the hydraulic componentry used in the auto-reset system, the Alstrong® 700 ultra high strength heat-treated plate used for the chassis, and most importantly the fineness and level nature of the job it does (across all soil types). This machine has proved equal to abrasive, rocky, unforgiving South Island conditions. As a lot of this country inland makes good wintering ground due to its drainage properties, this is the heavily pugged and damaged conditions the Terraland thrives in. The hydraulic trip protection can be adjusted to the desired pressure, and each leg also has additional traction shearbolt protection as well. If youre conditions have destroyed your previous ripper, and you need to remove compaction and get air into the soil, this machine is your answer! Phone for infopack, client referrals, and some impressive video footage. Limited stock available for spring.

Boost pasture growth and flatten out pugged fields all in one high-speed pass! Spiral arranged tapered Hardox® blades make 11 cuts per square metre, at up to 16km/h forward speed. Improving drainage, break pans and allows oxygen, water and nutrients down to the grass root depth and boost pasture yield. Prevents effluent runoff from grazed areas, and perfect combination with effluent spreading, get it down to the roots where it can add the most value! Ballast machine up to 6 ton to crack the ground in the hardest summer and autumn months to set up your fields for drainage over winter. Versatile machine also smooths out badly pugged areas in late winter allowing spring growth to tiller and come away. High speed, simple to use, and effective. Hardox blades and 20mm drum thickness is proven in stony South Island conditions, seriously built machine with wide 22.5 flotation wheels, ideal for high speed contractor work between farms. Once again we have combined the unique needs of NZs farmers and tough conditions, with the best in European engineering. NZ Design DNA and European build quality the winning combination! Immediate delivery, repair winter damage and set your pasture up to maximize spring flush!

With many of the class-leading features of the Titan, the 4500 gives large farmers the same quality and robustness in design, and is ideal for larger acreages of small seed, chicory, grass drilling where a standard 10 roller drill just takes too long! Vertical folding wings give a very compact transport size, and the nuggety 4050kg weight across 4.5m gives serious consolidation for crop establishment. Convenient fold-down steps give the operator access to the hopper for seed loading and additional bag storage. A wide 2.8m wheelbase, give optimum stability and safety on the road. Rear mounted wheel carriage gives better operator safety on steep hillsides to get out of trouble quickly by transferring weight to tractor drawbar. Superstrike® cover harrow gives ultimate seed cover and crop strike, with simple, un-complicated manual carrying of the harrow. Discerning farmers, if you want the best new grass and small seed establishment, look no further than the Titan family of roller drills, NZ Design DNA and European build quality what a combination! Limited stock for spring delivery, phone now.

Whether laser or GPS grading fields in intensive cropping operations, building pad preparation or haul road maintenance, or simply taking high and low points out of fields to re-distribute water, the Titan 5.0mtr trailed leveller is a fast and effective way to do this. Optimum precision that works seamlessly with all major GPS or laser guidance systems, the robust machine can quickly add value to your cropping operation. Folds to 3.0m for road transport, yet 5.0mtrs in work means you get through the hectares quickly. Levelling done from 6 flotation wheels for high accuracy, blade tilt, height and angle planes all hydraulically adjustable from cab. European engineering proven over thousands of hectares in NZ conditions. Immediate delivery.

Contractors and farmers nationwide are proving the increased crop yields and simplicity of operation the NG 300-7 supergrubber brings. The only machine with 10+ yrs of NZ design DNA under its belt, and earning its stripes in some of the South Islands harshest conditions (stony, abrasive fields), many of its unique design areas are due to thousands of hectares in these conditions on high HP tractors. This heavy duty chisel plough brings another dimension to your cultivation tasks. Awesome out of winter crop ground, this machine destroys deeper compaction as well as top-working the surface all at impressive workrates of 3.0ha/hr! Boost root crops such as maize and fodder beet yields, and continually improve your soil structure and organic matter at the same time!