Engines & Engine Parts Truck Parts For Sale

9NZ C15 engine

Mack MP8 500C

NO5C UJ Engine out of a out of a 2022 Hino 300

Mitsi 6D17 stock 884 Mitsi 4D31T stock 1123 Mitsi 4D30 stock 1101 Mitsi 4D32 Mitsi 4D33 Mitsi 4D34T Mitsi 4D35 Mitsi 4M40 Mitsi 4m42T Mitsi 8DC9TT stock 1055 Mitsi 8DC9-1AT2 stock 1187 rebuilt Nissan FD35 Nissan FD42 Nissan FD46 Nissan FE6 stock 1089 Nissan LD20#T Nissan NU-RF8 stock 1134 Nissan QD32 Nissan PD6 stock 1114 Nissan PE6 stock 1108 Nissan TD23 2.3ltr Nissan TD25 stock 918 Nissan TD27

Work done to the engine below Tested the Cummins ISX engine for causes of excessive fuming from the breather. Confirmed the excessive fuming was caused by worn piston rings. The decision was made to rebuild the engine. Disassembled the engine removing the cylinder head and all pistons and cylinder liners. Cleaned the engine block and checked all components for re-usability. Rebuilt the engine with an inframe engine rebuild kit. Replaced the main crankshaft bearings. Fitted new pistons and cylinder liners with new rings and crankshaft bearings. Replaced the worn engine oil pump. Fitted a reconditioned cylinder head to the engine as supplied with new gaskets and seals. Reassembled the engine and top tuned. Refilled with new oil and coolant. Started and test ran. Road tested the vehicle and rechecked the engine for faults, all ok.

Cummins Signature 525Hp New mains and big ends, Cams been Inspected, Floor ran Sold on exchange

DD16 600hp Out of a 2021 Freightliner Cascadia 123,500kms Call Craig on 0274963951 to enquire

Out of a 2013 Mitsi Fighter

Removed the sump from the engine. removed the oil pump and pick up. Removed the crankshaft big end and main bearing caps. Inspected the crankshaft and bearings, found the crankshaft in a good condition with normal wear to the bearings. Fitted a new set of big end, main and thrust bearings. Torqued all components to spec. Checked the oil pump and found it to be worn. Fitted a new oil pump and refitted the pick up. Refitted the sump with a new gasket. Removed the rocker cover and inspected the camshaft and rockers for wear, all ok. Found the rocker arm on #1 injector had a missing wear foot. Removed the engine brake and rocker shaft and replaced the injector rocker with a good second hand one. Refitted the rocker shaft and top tuned the engine adjusting the valve clearances, injector heights and Jacobs brake settings. Resealed and refitted the rocker covers. Changed the oil and fuel filters and filled the engine with new oil.

D26 540 Engine ready to go Out of a 2018 Man Mains and big ends checked