Equipment & Trucks For Sale from $100,000 to $250,000 in Southland

John Deere 7250R 250 hp + Boost 5975 hours 2017 model IVT 50 kph Front linkage & PTO Good rubber $169,000 plus GST SU# 64611 view at 93 North Road, Invercargill

A very tidy, one-owner machine with good hours. This unit is set up with a Blade, A2 Ram-Tilt Hydraulic Coupler, Wide Bucket and Dig Bucket. It is also specified with Track Guards and 600mm Grousers. Hour Meter: 5,810 Hours (Machine still in work, so hours may change) Located Gore

K-Line 2962P Speedtiller Powerflex 6m Folding Trailing Speed Disc

A tidy, one-owner machine with good hours. This unit is set up with an A2 Hydraulic Coupler, Tilt Bucket and Dig Bucket. It is also specified with Track Guards and 600mm Grousers. Track Gear has been done and has approx. 80% life remaining. Available now. Located Gore

John Deere 6140R 140 hp 4790 hours c/w John Deere H360 NSL Loader 20x20 Power Quad Transmission Elec Loader Joystick 3 x Rear remotes 3rd Service Hyd Trailer Brakes TLS Front Suspension Cab suspension $100,000 plus GST SU# 64641 view at 93 North Road, Invercargill

Used 2014 CASE 2050M 23.0t Bulldozer. A low hour Bulldozer in great condition. This tractor is well specified with a 3.4m Semi-U Blade, Rear Rippers, Sweeps and Track Guards. Track Chains and Sprockets on this machine was replaced less than 100 hours ago. This unit runs the FPT 6.7L 232Hp engine and Hydrostatic Transmission. This model has industry-leading draw bar pull and great visibility. Hour Meter: 3,730 Hours (Machine still in work, so hours are subject to change)

Used 2014 CASE 885B 20.0t Grader. A very tidy machine with low hours. This unit is well set up with: 14ft Moldboard Rear Rippers with Scarifiers Michelin 17.5-R25 Tyres Front Blade also available (not installed) A full Leica 3D System was installed on this machine in 2022 at a cost of $80,000.00+GST. This is available for an extra $55,000.00+GST over and above the asking price, or can be removed if not required. Located Gore

Used 2019 CASE 921F 20.0t Wheel Loader This is a very well-specified machine with low hours. The 921F runs an FPT 6.7L 255Hp Engine and ZF Transmission. Included on this unit: - Standard & Joystick Steering - 4.0m3 GP Bucket with BOCE - Loadrite Scales - Bro-Lube Auto-Greasing System - Michelin 23.5-R25 L5 Tyres - Reverse Camera Located Gore

Used 2019 CASE CX145 CSR 14.5 ton Short Radius Excavator. A very tidy, one-owner machine with low hours. This unit is set up with a Blade, A2 Ram-Tilt Hydraulic Coupler, Wide Bucket and Dig Bucket. Located Gore We can arrange transport NZ-wide.

Trima Q7 loader Front Linkage & PTO Deutz TCD 2012 LO6 2V Stage 3A Diesel Engine 6 Cyl/6057cc Turbocharged/Intercooled NO Adblue Liquid/Oil Cooled Common Rail DCR (Deutz Common Rail) Injection System 183 Rated Engine HP Rated Power @ 2200 RPM 190 Max HpRated Max Power @ 2050 RPM 770 Nm Max torque @ 1600 RPM Engine Speed Programming Powercore Air Filter with Dust Ejectors 345 Lt Fuel Capacity Transmission ZF TPT18 Transmission 54F + 27R, 5 Range, 6 Powershift gears Manual, Semi-Auto, Full Auto Modes APS Function (Automatic Power Shift) Speed matching ASM Auto Diff Lock & 4WD Engagement Sense Clutch with 5 Power Shuttle Settings Front & Rear Diff Lock100% 50 km/h Road speed @ Ultra Economy RPM 540-65-R28 Front 650-65-R38 Rear Tyres, Brand Supplied by Factory Braking & Front Axle Carraro 20.43 Suspended Front Axle 52 Degree Steering Angle Power Brake System Brake Booster System Closed Centre Load Sensing Hyd Pump System 125L/min Hyd Flow at Rear Remotes Hydrostatic Steering Pump Separate 42 litres/Min 4 Sets of Mechanical Remotes (4 Pair rear) AGROTRONIC EHR with Position & Draft Control Free Flow Return Line Power Beyond Valve External Raise & Lower on Both Rear Fenders Cat 3 Hook Ends -Telescopic Automatic Stabilisers 9,700 kg Rear lift Capacity-with Assistor Rams Swinging Rear DrawbarCat III Satellite Armrest w/Maxcom Joystick Tilting and Adjustable Steering Column with Integrated Dash