Demolition and recycling: Powerscreen Trakpactor 290SR

Date: 17.11.2023

The Trakpactor 290SR impact crusher can perform in the most challenging of applications

The Trakpactor 290SR is versatile and easy to use

Powerscreen impact crushers are designed to excel as primary impactors, taking large feed material and reducing it down to a sellable product. Impactors are often used as a
cost-effective alternative to jaw and cone combination plants, as they have a good level of reduction and product shaping for many applications.

Powerscreen’s impactor range can be ideal for shaping applications, including making chips, sand, concrete manufacture, and glass recycling. The range includes both horizontal and vertical impact crushers. Stevens Group is the distributor of Powerscreen throughout New Zealand.

With more than 50 years of accredited experience in importing, distributing, and manufacturing world-class machinery throughout New Zealand, Stevens Group’s material handling range of equipment offers a wide range of tracked stackers and feeder conveyors suited to specific material handling requirements. Their parts facility stocks 20,000 plus different line items.

Product focus: Trakpactor 290SR horizonal impactor

Trakpactor 290SR outputting 40mm product from alluvial

The Powerscreen Trakpactor 290SR impact crusher performs in the most challenging of applications, such as construction and demolition, asphalt, concrete, and natural rock.

The compact design allows it to operate in small landing spaces and easily be transported from site to site. The Trakpactor is a versatile and easy-to-use compact impact crusher that can operate in the most demanding of applications, such as recycling, demolition, quarrying, and aggregate production.

Trakpactor 290SR being feed by Warrior 600

Recirculating integrated system

The integrated system ensures the required product specification is achieved with oversized material either recirculated back to the crusher or stockpiled.

Portable solution

The machine sets up rapidly and is simple to operate. The compact size also provides ease of transportation, making the portable crusher an ideal solution for remote job sites.

Enclosed hopper

Material is fed into a fully enclosed hopper, which eliminates any potential for material spillage down into the engine bay beneath.

Rapid set-up

Designed to be a perfect solution for onsite recycling in urban areas, the Trakpactor 290 is easy to transport from site to site where it can be rapidly set up from ground level. This, along with the intuitive two-button start-up sequence, helps ensure the machine can be crushing in a matter of minutes.

Easy maintenance and serviceability

Ground-level access to the engine, hydraulics, service, and refuelling points ensures maintenance is easy
Configuring the machine to suit differing applications is straightforward
Designed with the operator in mind in terms of ease of use and serviceability
Easy engine service access with
‘walk-in’ ability at rear to access engine dipstick/filters
Hydraulic components grouped together and electrical components grouped together for easy troubleshooting
Post-screen can be lowered to horizontal to ease mesh change and maintenance
Ability to quickly detach the complete afterscreen system to convert the machine to a straight-through model or to transport it separately

Quick features

Fully enclosed hopper to eliminate spillage
Crusher with hydraulic overload protection
Modular conveyor with raise/lower facility to aid clearance of rebar
Product conveyor can be removed as a unit if required
Proven Terex impact crusher with hydraulic overload protection, four-bar rotor and twin aprons
Feeder speed automatically regulates depending on the engine load
Integrated pre-screen for fines removal (punch plate, grizzly bars, and blanking plate are all interchangeable)
HPTO clutch and fuel-efficient direct drive system
Wear-resistant feed hopper
Simple, intuitive push-button operation
Dust suppression system with atomiser nozzles mounted over the product conveyor
All Powerscreen crushers are fitted as standard with the Pulse Telematics system

Trakpactor 290SR options

Overband magnet
Optional bolt-on hopper extensions (must be removed for transport)
Trakpactor 290SR applications
Blasted rock
River rock
C&D waste
Foundry waste
Processed ores
Processed minerals

Trakpactor 290SR horizonal impactor specifications

Output	Up to 290tph
Hopper Capacity	3.3m3
Crusher	Twin apron 4 bar impact crusher
Crusher feed opening	1030mm x 790mm
Rotor speed	630–800rpm (34–43m/s)
Product conveyer	Width 1000mm
Post screen	Top deck size: 2.74m x 1.5m