New & Used 0-7 Tonnes Excavators For Sale

Used 2022 XCMG XE55U 5.5t Excavator A tidy, low-hour machine. This Short Radius unit is set up with the below options: A/Cond Cab, Rubber Tracks, Power Angle Blade, Dual Aux. Circuits, Hydraulic Hitch, Attach2 Twin-Ram Tilt Bucket, Dig Bucket, Trench Bucket. Located Christchurch

Used 2022 XCMG XE35U 4.0 ton Excavator. This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 108 Hours (Machine still in use, so hours may change) Located Gore This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 200.4 Hours (Machine still in use, so hours may change) Located Gore

Aluminium Loading RAMPS 2200kg 2.4m long $1350 plus gst. 3000kg 2.9m long $2250 plus gst. 3000kg 3.3m long $2250 plus gst. 4500kg 3.3m long $2795 plus gst. 4500kg 3.6m long $2900 plus gst. 6000kg 3.6m long $3450 plus gst. Other size ramps available from 400kg to 10,000kg. Check our other listings or just ask. This listing is for 2200kg, 2.4m long ramps and suits your truck deck height 750mm to 850mm - $1,350 + gst. We have different lengths for different deck heights. Ramps suit rubber or steel tracked or wheeled machines. Heavy Duty. FREE locking pins included - Normally $32 plus gst each x2 required free. We freight anywhere in NZ.

Used 2020 CASE CX60C 6.0t Digger A very tidy, late model machine. This Short Radius unit is set up with an A/Cond Cab, Slew Boom, Blade, Rubber Tracks, Hydraulic Coupler, Tilt Bucket, Dig Bucket and Trench Bucket. Hour Meter: 1,560 Hours (Hours may change, as machine still in use) Located Gore

*CONTROL, JOYSTICK STEERING 1 PIECE SWING BOOM Auxiliary Hydraulics Pressure - Medium Pressure BLADE DIG BUCKET DRAWPIN HITCH EXPANDING TRACK FRAME Lighting LONG STICK, THUMB READY Online Owner's Manual PRODUCT LINK ROPS CANOPY Rubber Track TILT BUCKET GENERAL APPEARANCE * Cleaning Required: No * Extra Fuel Tanks: No * Bumper: Good * Car Body: Good * Counterweight: Good * Crankcase Guard / Battery Box: Good * Decals: Good * Draw Bar: Good * Eng. Enclose Hood / Stack: Good * Engine Doors: Good * Fenders: Good * Fuel Tank: Good * Grab Irons: Good * Main Frame Welds: Good * Paint: Good * Plastic: Good * Radiator Grill & Shroud: Good * Sheet Metal: Good SAFETY ITEMS * ROPS: Yes * Safety Decals In Place: Yes * Safety Decals Legible: Yes * Brake Hold: Good * Horn: Good * Swing Brake: Good OPERATOR STATION * Current O&MM: Yes * ROPS Certification Plate: Yes * Dash Console: Good * EMS Panel / Warnings: Good * Floor Boards: Good * Gauges: Good * Meter: Good * Product Link: Good * Seat Belt: Good * Seat Cushion / Arm Rest: Good * Switches: Good ENGINE * Blow By: No * Knocking: No * Oil Leaks: No * Water in Oil: No * Belts / Pulleys: Good * Fuel Injection System: Good * Governor: Good COOLING SYSTEM * Compression in Radiator: No * Coolers: Good * Fan: Good * Radiator: Good * Water Pump: Good ELECTRICAL, STARTING AND CHARGING SYSTEM * Block Heater: No * Ether Aid: No * Alternator: Good * Batteries / Cables: Good * Lighting: Good * Starter: Good * Wiring: Good HYDRAULICS * Boom Cylinder: Good * Bucket Cylinder: Good * Control Linkage: Good * Hose Lines: Good * Hydraulic Swivel: Good * Operating Condition - HYDRAULICS: Good * Pump Drive: Good * Pumps & Valves: Good * Stick Cylinder: Good * Swing Motors: Good * Tank: Good * Travel Motors: Good ATTACHMENTS / WORK TOOLS * Auger: No * Claw: No * Crusher: No * Grapple: No * Hammer: No * Pulverizer: No * Rake: No * Ripper: No * Shear: No * Thumb: No * Tilting Ditch Bucket: Yes * Vibratory Plate: No BOOM * Boom Condition: Good * Boom Pins: Good * Pins & Bushings - BOOM: Good STICK * Pins & Bushings - STICK: Good * Stick Conditions: Good * Stick Pins: Good UNDERCARRIAGE * Average Life Remaining - UNDERCARRIAGE: 60% * Notes - UNDERCARRIAGE: Rubber * Track Frame - Left: Good * Track Frame - Right: Good FINAL DRIVES * Housings: Good * Planetaries / Diff: Good

4550hr, Blade, Rubber tracks, Tilt Hitch, 3x bucket set, ROPS cabin, Tidy. Also AX33U-6A & 305.5E2 available

Bobcat E26GM MINI EXCAVATOR 2014 Engine Power - 24.8 HP Maximum flow - 47.4 ltr/min Operating Weight - 2600 kg 300mm, 450mm and 1000mm trim bucket Hydraulic Hitch BURTON Office : (08) 828...

Komatsu PC20MR-3 2-Ton Excavator and Tipper Truck Package Price: $89,000 + GST Digger specifications Make: Komatsu Model: PC20MR-3 SN: KMTPC215VJE024561 Hours: 839 Blade: 1450mm dozer blade Tracks: 250mm rubber tracks Attachments: Komatsu pull pin hitch, 900mm tilt bucket, 440mm dig bucket, 200mm spade bucket Truck specifications Make: Isuzu Model: N Series NPR325 AMT Tipper Year: 2017 VIN: JAANPR75HF7110750 Rego: KQE40 | 01/04/2024 COF: 27/04/2024 Odometer: 94,313kms Hubodometer: 591kms RUCS: untill 1,002kms GVM: 5,995kg Tare weight: 3,690kg Payload: 2,305kg Transmission: Automatic -3000kg capacity ramps -3.8m x 2.15m deck -Towbar Nationwide freight is available. We have a large range of earthmoving and compaction equipment, excavator attachments, access gears, trucks, trailers, forklifts, generators, lighting, compressors, welders, water blasters, and hoses in stock now! Please email or call us for further information. All prices EXCLUDE GST

Used 2018 CASE CX17C 1.7t Compact Excavator. A tidy machine that has been well maintained from new. This machine is set up with Canopy, Hydraulic Expanding Tracks, Draw-Pin Hitch, Tilt Bucket, Dig Bucket and Trench Bucket. New Rubber Tracks just installed. Hour Meter: 1,660 Hours (Hours may change as machine still in work) We also have a 2018 Brian James 2,500Kg Plant Trailer available for an extra $5,000.00+GST. Located Gore

18-Z Mini excavator new machine in stock ready to go. 1.8ton 4 post ROPS/FOPS framer500 hour service and greasing intervals 3 year 3000 hour warranty 2 Buckets, 230mm Trench , 450mm Rock bucke...