HORSCH DC 4 Drill for sale $54,900

The ultimate Roller Drill 21" ondule ring with breaker ring on 70mm axle Farmer-owned machine Very good condition Farmchief Swiss Airseeder with hydraulic fan GPS electronic control Front levelling paddles Centre pivoting wings Rear platform Because of our central location, we specialise in freighting machinery NZ wide - especially North Island - enquire now! For more quality used machinery, check out www.mechs.co.nz

3.0m wide, 3 Bar, Made Of Railway Iron PRICES ARE PLUS GST and from $2195.00

The European built Hektor 300 subsoiler is a seriously well-built piece of kit suited up to 280Hp tractors. The action of the cranked leg and wide flat-lift shares under the ground, has a serious lifting effect, and shatters across full working width. You can see the huge wave in the surface profile as the machine goes past. The ground is not disturbed on the surface due to the way the legs slice through surface, and the large diameter heavy cage roller really pushes the dirt/turf back down. In pasture you can hardly see the cut from each leg, even without coulters. All of the legs are protected by hydraulic trip protection (independent accumulator for each leg). Depth control is on large hydraulic cylinders connected to the rear roller, this has a very simple spacer system to allow you to quickly set the working depth. 4 legs over 3.0mtrs makes for easy pulling (min 150Hp). Breathe life into damaged crop and pasture ground with this machine!