Cover story: Hidromek HMK 230 MG

A new grader brand is about to arrive on New Zealand shores and Deals on Wheels went to find out more

It was back in 2013 when Hidromek purchased the Mitsubishi grader brand, and in the intervening years have used the well-respected platform as a base to build their own versions of what customers have come to expect from the European equipment manufacturer.

Kiwi grader users will soon get to see the first Hidromek HMK 230 MG grader in the flesh when the manufacturer’s New Zealand distributor Magnum Equipment takes delivery of the first 12-tonne machine during January 2021. And rightly so – there is a high level of anticipation prior to its arrival.

“There is nothing available new of this size in the market, so we are confident that it will find a niche with contractors working those small to medium-sized subdivisions and carpark construction jobs,” says Magnum Equipment founder and director Liam Field. “There are a lot of other opportunities for this size grader, but our initial campaign will be for urban use.”

Familiarity with a modern twist

Powered by a Perkins engine, the HMK 230 MG retains a lot of the characteristic’s users of Mistubishi graders have become familiar with, while at the same time adding what Liam says is the right amount of technology to make the job easier, without overcomplicating it.

“The interior is similar to what people have come to love with Hidromek,” says Liam. “It has an air-suspension seat, aircon, sunshades all around, and a huge amount of visibility. They are just really nice machines.”

The operator can also keep in touch with what is happening in the outside world with the radio/mp3 player and USB port.

Safety features include a ROPS/FOPS cab, reversing camera and pedestrian proximity warning system, along with a dual independent braking system.

Keeping in touch with that familiarity, the HMK 230 MG keeps its traditional steering wheel and blade control lever setup.

“With the ease of control these graders have, companies that buy this machine don’t have to spend mega-bucks finding dedicated grader operators and could train existing capable staff, adding multi-skilled operator capability to their core business,” says Liam.

OPERA control

Similar to other products in the brand’s stable, the majority of operator requirements are accessed through Hidromek’s proprietary OPERA control system. The panel has menus to oversee: overheat protection, power and work modes, auto power-off, error mode registry and warning system, auto pre-heat, auto power boost, idling selection, rear view camera, personal operating code, operating hour registry; along with the usual real-time monitoring of operating parameters, such as oil pressure, temperature and engine loading.

Power, moving and stopping

As mentioned previously, Perkins is the engine of choice for the HMK 230 MG, specifically the 1204F-E44TAN. With a Tier 3 emission system, the engine outputs 92.6kW(124hp)@2200rpm, generating a maximum torque of 530Nm@1400rpm.

The power to the final drive is controlled via a direct drive powershift transmission, with six-forward and six-reverse gears. This allows for speeds from 3.60km/h to 45km/h in both directions. Bringing those 12-tonnes of iron to a stop is provided by the dual circuit air-activated multiple discs through the four rear wheels.

Blade uses

Designed to be used in all environments, the blade allows for use in a variety of operations, such as mixing, dozing, batter creation, ditch digging, and of course, grading of surfaces to a high finished standard.

Made from wear-resistant steel with box-steel reinforcement, the 3100mm long blade, stands 530mm tall, has a maximum digging depth of 410mm and can be raised 430mm above ground level.

The blade can be rotated 360 degrees and has maximum cutting angles on the left side of 81 degrees and 36 degrees on the right-hand-side of the machine.

Cutting edges and end bits are easily available to maintain maximum service life, according to the manufacturer.

Hire fleet possibilities

Being a tried-and-true design, Liam says the HMK 230 MG grader would also fit well into a hire fleet.

“We actually had an older model 12-tonne Mitsubishi grader in the Magnum Hire fleet for many years. It was always out and the only reason we stopped hiring it was because eventually the machine became non-compliant, as it had no ROPS protection,” he says.

“The Hidromek graders have full ROPS and FOPS, so that is no longer an issue, but I am adamant this size grader would be ideal in hire fleets.”

True grader

“I guess one of the main points I want to get across is that the HMK 230 MG is a true grader in every sense of the word. It is made to do hard work and like all Hidromek machinery, has been tested in a country that has a predominately rocky environment,” says Liam.

“These machines are built to take hard knocks and come out smiling at the other end.”

Hidromek HMK 230 MG specifications

Operating weight	12,100kg
Overall length	7602mm
Overall width	2180mm
Overall height to top of cab	3280mm
Wheelbase	5300mm
Engine	Perkins 1204D-E44TA
Net power	96.5kW(129hp) @2200rpm
Max torque	516Nm @1400rpm
Transmission	Direct drive powershift
Gear	6 forward/6 reverse
Max speed	3.60–45.4km/h
Articulation angle	26 degrees
Front axle oscillation	30 degrees
Wheel leaning	20 degrees
Tyres	11.00-20 16PR
Pump type	Variable displacement piston pump
Capacity	146 L/min
Max working pressure	172 bar
Cab certification	ROPS/FOPS
Blade length	3100mm
Blade height	530mm
Max blade height from ground	430mm
Max dig depth	410mm
Blade turning angle	360 degrees
Max bank cutting angle	90 degrees
Cutting angle	36-81 degrees

For more information contact, magnumequipment.co.nz

Find new and used machinery for sale in NZ

Photography: Supplied